.. DO NOT EDIT. .. THIS FILE WAS AUTOMATICALLY GENERATED BY SPHINX-GALLERY. .. TO MAKE CHANGES, EDIT THE SOURCE PYTHON FILE: .. "auto_examples/ensemble/plot_gradient_boosting_quantile.py" .. LINE NUMBERS ARE GIVEN BELOW. .. only:: html .. note:: :class: sphx-glr-download-link-note :ref:`Go to the end ` to download the full example code. or to run this example in your browser via JupyterLite or Binder .. rst-class:: sphx-glr-example-title .. _sphx_glr_auto_examples_ensemble_plot_gradient_boosting_quantile.py: ===================================================== Prediction Intervals for Gradient Boosting Regression ===================================================== This example shows how quantile regression can be used to create prediction intervals. See :ref:`sphx_glr_auto_examples_ensemble_plot_hgbt_regression.py` for an example showcasing some other features of :class:`~ensemble.HistGradientBoostingRegressor`. .. GENERATED FROM PYTHON SOURCE LINES 12-16 .. code-block:: Python # Authors: The scikit-learn developers # SPDX-License-Identifier: BSD-3-Clause .. GENERATED FROM PYTHON SOURCE LINES 17-19 Generate some data for a synthetic regression problem by applying the function f to uniformly sampled random inputs. .. GENERATED FROM PYTHON SOURCE LINES 19-33 .. code-block:: Python import numpy as np from sklearn.model_selection import train_test_split def f(x): """The function to predict.""" return x * np.sin(x) rng = np.random.RandomState(42) X = np.atleast_2d(rng.uniform(0, 10.0, size=1000)).T expected_y = f(X).ravel() .. GENERATED FROM PYTHON SOURCE LINES 34-43 To make the problem interesting, we generate observations of the target y as the sum of a deterministic term computed by the function f and a random noise term that follows a centered `log-normal `_. To make this even more interesting we consider the case where the amplitude of the noise depends on the input variable x (heteroscedastic noise). The lognormal distribution is non-symmetric and long tailed: observing large outliers is likely but it is impossible to observe small outliers. .. GENERATED FROM PYTHON SOURCE LINES 43-47 .. code-block:: Python sigma = 0.5 + X.ravel() / 10 noise = rng.lognormal(sigma=sigma) - np.exp(sigma**2 / 2) y = expected_y + noise .. GENERATED FROM PYTHON SOURCE LINES 48-49 Split into train, test datasets: .. GENERATED FROM PYTHON SOURCE LINES 49-51 .. code-block:: Python X_train, X_test, y_train, y_test = train_test_split(X, y, random_state=0) .. GENERATED FROM PYTHON SOURCE LINES 52-64 Fitting non-linear quantile and least squares regressors -------------------------------------------------------- Fit gradient boosting models trained with the quantile loss and alpha=0.05, 0.5, 0.95. The models obtained for alpha=0.05 and alpha=0.95 produce a 90% confidence interval (95% - 5% = 90%). The model trained with alpha=0.5 produces a regression of the median: on average, there should be the same number of target observations above and below the predicted values. .. GENERATED FROM PYTHON SOURCE LINES 64-79 .. code-block:: Python from sklearn.ensemble import GradientBoostingRegressor from sklearn.metrics import mean_pinball_loss, mean_squared_error all_models = {} common_params = dict( learning_rate=0.05, n_estimators=200, max_depth=2, min_samples_leaf=9, min_samples_split=9, ) for alpha in [0.05, 0.5, 0.95]: gbr = GradientBoostingRegressor(loss="quantile", alpha=alpha, **common_params) all_models["q %1.2f" % alpha] = gbr.fit(X_train, y_train) .. GENERATED FROM PYTHON SOURCE LINES 80-87 Notice that :class:`~sklearn.ensemble.HistGradientBoostingRegressor` is much faster than :class:`~sklearn.ensemble.GradientBoostingRegressor` starting with intermediate datasets (`n_samples >= 10_000`), which is not the case of the present example. For the sake of comparison, we also fit a baseline model trained with the usual (mean) squared error (MSE). .. GENERATED FROM PYTHON SOURCE LINES 87-90 .. code-block:: Python gbr_ls = GradientBoostingRegressor(loss="squared_error", **common_params) all_models["mse"] = gbr_ls.fit(X_train, y_train) .. GENERATED FROM PYTHON SOURCE LINES 91-93 Create an evenly spaced evaluation set of input values spanning the [0, 10] range. .. GENERATED FROM PYTHON SOURCE LINES 93-95 .. code-block:: Python xx = np.atleast_2d(np.linspace(0, 10, 1000)).T .. GENERATED FROM PYTHON SOURCE LINES 96-99 Plot the true conditional mean function f, the predictions of the conditional mean (loss equals squared error), the conditional median and the conditional 90% interval (from 5th to 95th conditional percentiles). .. GENERATED FROM PYTHON SOURCE LINES 99-122 .. code-block:: Python import matplotlib.pyplot as plt y_pred = all_models["mse"].predict(xx) y_lower = all_models["q 0.05"].predict(xx) y_upper = all_models["q 0.95"].predict(xx) y_med = all_models["q 0.50"].predict(xx) fig = plt.figure(figsize=(10, 10)) plt.plot(xx, f(xx), "g:", linewidth=3, label=r"$f(x) = x\,\sin(x)$") plt.plot(X_test, y_test, "b.", markersize=10, label="Test observations") plt.plot(xx, y_med, "r-", label="Predicted median") plt.plot(xx, y_pred, "r-", label="Predicted mean") plt.plot(xx, y_upper, "k-") plt.plot(xx, y_lower, "k-") plt.fill_between( xx.ravel(), y_lower, y_upper, alpha=0.4, label="Predicted 90% interval" ) plt.xlabel("$x$") plt.ylabel("$f(x)$") plt.ylim(-10, 25) plt.legend(loc="upper left") plt.show() .. image-sg:: /auto_examples/ensemble/images/sphx_glr_plot_gradient_boosting_quantile_001.png :alt: plot gradient boosting quantile :srcset: /auto_examples/ensemble/images/sphx_glr_plot_gradient_boosting_quantile_001.png :class: sphx-glr-single-img .. GENERATED FROM PYTHON SOURCE LINES 123-138 Comparing the predicted median with the predicted mean, we note that the median is on average below the mean as the noise is skewed towards high values (large outliers). The median estimate also seems to be smoother because of its natural robustness to outliers. Also observe that the inductive bias of gradient boosting trees is unfortunately preventing our 0.05 quantile to fully capture the sinoisoidal shape of the signal, in particular around x=8. Tuning hyper-parameters can reduce this effect as shown in the last part of this notebook. Analysis of the error metrics ----------------------------- Measure the models with :func:`~sklearn.metrics.mean_squared_error` and :func:`~sklearn.metrics.mean_pinball_loss` metrics on the training dataset. .. GENERATED FROM PYTHON SOURCE LINES 138-157 .. code-block:: Python import pandas as pd def highlight_min(x): x_min = x.min() return ["font-weight: bold" if v == x_min else "" for v in x] results = [] for name, gbr in sorted(all_models.items()): metrics = {"model": name} y_pred = gbr.predict(X_train) for alpha in [0.05, 0.5, 0.95]: metrics["pbl=%1.2f" % alpha] = mean_pinball_loss(y_train, y_pred, alpha=alpha) metrics["MSE"] = mean_squared_error(y_train, y_pred) results.append(metrics) pd.DataFrame(results).set_index("model").style.apply(highlight_min) .. raw:: html
  pbl=0.05 pbl=0.50 pbl=0.95 MSE
model        
mse 0.715413 0.715413 0.715413 7.750348
q 0.05 0.127128 1.253445 2.379763 18.933253
q 0.50 0.305438 0.622811 0.940184 9.827917
q 0.95 3.909909 2.145957 0.382005 28.667219


.. GENERATED FROM PYTHON SOURCE LINES 158-173 One column shows all models evaluated by the same metric. The minimum number on a column should be obtained when the model is trained and measured with the same metric. This should be always the case on the training set if the training converged. Note that because the target distribution is asymmetric, the expected conditional mean and conditional median are significantly different and therefore one could not use the squared error model get a good estimation of the conditional median nor the converse. If the target distribution were symmetric and had no outliers (e.g. with a Gaussian noise), then median estimator and the least squares estimator would have yielded similar predictions. We then do the same on the test set. .. GENERATED FROM PYTHON SOURCE LINES 173-185 .. code-block:: Python results = [] for name, gbr in sorted(all_models.items()): metrics = {"model": name} y_pred = gbr.predict(X_test) for alpha in [0.05, 0.5, 0.95]: metrics["pbl=%1.2f" % alpha] = mean_pinball_loss(y_test, y_pred, alpha=alpha) metrics["MSE"] = mean_squared_error(y_test, y_pred) results.append(metrics) pd.DataFrame(results).set_index("model").style.apply(highlight_min) .. raw:: html
  pbl=0.05 pbl=0.50 pbl=0.95 MSE
model        
mse 0.917281 0.767498 0.617715 6.692901
q 0.05 0.144204 1.245961 2.347717 15.648026
q 0.50 0.412021 0.607752 0.803483 5.874771
q 0.95 4.354394 2.355445 0.356497 34.852774


.. GENERATED FROM PYTHON SOURCE LINES 186-208 Errors are higher meaning the models slightly overfitted the data. It still shows that the best test metric is obtained when the model is trained by minimizing this same metric. Note that the conditional median estimator is competitive with the squared error estimator in terms of MSE on the test set: this can be explained by the fact the squared error estimator is very sensitive to large outliers which can cause significant overfitting. This can be seen on the right hand side of the previous plot. The conditional median estimator is biased (underestimation for this asymmetric noise) but is also naturally robust to outliers and overfits less. .. _calibration-section: Calibration of the confidence interval -------------------------------------- We can also evaluate the ability of the two extreme quantile estimators at producing a well-calibrated conditional 90%-confidence interval. To do this we can compute the fraction of observations that fall between the predictions: .. GENERATED FROM PYTHON SOURCE LINES 208-218 .. code-block:: Python def coverage_fraction(y, y_low, y_high): return np.mean(np.logical_and(y >= y_low, y <= y_high)) coverage_fraction( y_train, all_models["q 0.05"].predict(X_train), all_models["q 0.95"].predict(X_train), ) .. rst-class:: sphx-glr-script-out .. code-block:: none np.float64(0.9) .. GENERATED FROM PYTHON SOURCE LINES 219-221 On the training set the calibration is very close to the expected coverage value for a 90% confidence interval. .. GENERATED FROM PYTHON SOURCE LINES 221-226 .. code-block:: Python coverage_fraction( y_test, all_models["q 0.05"].predict(X_test), all_models["q 0.95"].predict(X_test) ) .. rst-class:: sphx-glr-script-out .. code-block:: none np.float64(0.868) .. GENERATED FROM PYTHON SOURCE LINES 227-244 On the test set, the estimated confidence interval is slightly too narrow. Note, however, that we would need to wrap those metrics in a cross-validation loop to assess their variability under data resampling. Tuning the hyper-parameters of the quantile regressors ------------------------------------------------------ In the plot above, we observed that the 5th percentile regressor seems to underfit and could not adapt to sinusoidal shape of the signal. The hyper-parameters of the model were approximately hand-tuned for the median regressor and there is no reason that the same hyper-parameters are suitable for the 5th percentile regressor. To confirm this hypothesis, we tune the hyper-parameters of a new regressor of the 5th percentile by selecting the best model parameters by cross-validation on the pinball loss with alpha=0.05: .. GENERATED FROM PYTHON SOURCE LINES 246-276 .. code-block:: Python from sklearn.experimental import enable_halving_search_cv # noqa from sklearn.model_selection import HalvingRandomSearchCV from sklearn.metrics import make_scorer from pprint import pprint param_grid = dict( learning_rate=[0.05, 0.1, 0.2], max_depth=[2, 5, 10], min_samples_leaf=[1, 5, 10, 20], min_samples_split=[5, 10, 20, 30, 50], ) alpha = 0.05 neg_mean_pinball_loss_05p_scorer = make_scorer( mean_pinball_loss, alpha=alpha, greater_is_better=False, # maximize the negative loss ) gbr = GradientBoostingRegressor(loss="quantile", alpha=alpha, random_state=0) search_05p = HalvingRandomSearchCV( gbr, param_grid, resource="n_estimators", max_resources=250, min_resources=50, scoring=neg_mean_pinball_loss_05p_scorer, n_jobs=2, random_state=0, ).fit(X_train, y_train) pprint(search_05p.best_params_) .. rst-class:: sphx-glr-script-out .. code-block:: none {'learning_rate': 0.2, 'max_depth': 2, 'min_samples_leaf': 20, 'min_samples_split': 10, 'n_estimators': 150} .. GENERATED FROM PYTHON SOURCE LINES 277-285 We observe that the hyper-parameters that were hand-tuned for the median regressor are in the same range as the hyper-parameters suitable for the 5th percentile regressor. Let's now tune the hyper-parameters for the 95th percentile regressor. We need to redefine the `scoring` metric used to select the best model, along with adjusting the alpha parameter of the inner gradient boosting estimator itself: .. GENERATED FROM PYTHON SOURCE LINES 285-300 .. code-block:: Python from sklearn.base import clone alpha = 0.95 neg_mean_pinball_loss_95p_scorer = make_scorer( mean_pinball_loss, alpha=alpha, greater_is_better=False, # maximize the negative loss ) search_95p = clone(search_05p).set_params( estimator__alpha=alpha, scoring=neg_mean_pinball_loss_95p_scorer, ) search_95p.fit(X_train, y_train) pprint(search_95p.best_params_) .. rst-class:: sphx-glr-script-out .. code-block:: none {'learning_rate': 0.05, 'max_depth': 2, 'min_samples_leaf': 5, 'min_samples_split': 20, 'n_estimators': 150} .. GENERATED FROM PYTHON SOURCE LINES 301-309 The result shows that the hyper-parameters for the 95th percentile regressor identified by the search procedure are roughly in the same range as the hand- tuned hyper-parameters for the median regressor and the hyper-parameters identified by the search procedure for the 5th percentile regressor. However, the hyper-parameter searches did lead to an improved 90% confidence interval that is comprised by the predictions of those two tuned quantile regressors. Note that the prediction of the upper 95th percentile has a much coarser shape than the prediction of the lower 5th percentile because of the outliers: .. GENERATED FROM PYTHON SOURCE LINES 309-327 .. code-block:: Python y_lower = search_05p.predict(xx) y_upper = search_95p.predict(xx) fig = plt.figure(figsize=(10, 10)) plt.plot(xx, f(xx), "g:", linewidth=3, label=r"$f(x) = x\,\sin(x)$") plt.plot(X_test, y_test, "b.", markersize=10, label="Test observations") plt.plot(xx, y_upper, "k-") plt.plot(xx, y_lower, "k-") plt.fill_between( xx.ravel(), y_lower, y_upper, alpha=0.4, label="Predicted 90% interval" ) plt.xlabel("$x$") plt.ylabel("$f(x)$") plt.ylim(-10, 25) plt.legend(loc="upper left") plt.title("Prediction with tuned hyper-parameters") plt.show() .. image-sg:: /auto_examples/ensemble/images/sphx_glr_plot_gradient_boosting_quantile_002.png :alt: Prediction with tuned hyper-parameters :srcset: /auto_examples/ensemble/images/sphx_glr_plot_gradient_boosting_quantile_002.png :class: sphx-glr-single-img .. GENERATED FROM PYTHON SOURCE LINES 328-333 The plot looks qualitatively better than for the untuned models, especially for the shape of the of lower quantile. We now quantitatively evaluate the joint-calibration of the pair of estimators: .. GENERATED FROM PYTHON SOURCE LINES 333-334 .. code-block:: Python coverage_fraction(y_train, search_05p.predict(X_train), search_95p.predict(X_train)) .. rst-class:: sphx-glr-script-out .. code-block:: none np.float64(0.9026666666666666) .. GENERATED FROM PYTHON SOURCE LINES 335-336 .. code-block:: Python coverage_fraction(y_test, search_05p.predict(X_test), search_95p.predict(X_test)) .. rst-class:: sphx-glr-script-out .. code-block:: none np.float64(0.796) .. GENERATED FROM PYTHON SOURCE LINES 337-342 The calibration of the tuned pair is sadly not better on the test set: the width of the estimated confidence interval is still too narrow. Again, we would need to wrap this study in a cross-validation loop to better assess the variability of those estimates. .. rst-class:: sphx-glr-timing **Total running time of the script:** (0 minutes 9.207 seconds) .. _sphx_glr_download_auto_examples_ensemble_plot_gradient_boosting_quantile.py: .. only:: html .. container:: sphx-glr-footer sphx-glr-footer-example .. container:: binder-badge .. image:: images/binder_badge_logo.svg :target: https://mybinder.org/v2/gh/scikit-learn/scikit-learn/1.6.X?urlpath=lab/tree/notebooks/auto_examples/ensemble/plot_gradient_boosting_quantile.ipynb :alt: Launch binder :width: 150 px .. container:: lite-badge .. image:: images/jupyterlite_badge_logo.svg :target: ../../lite/lab/index.html?path=auto_examples/ensemble/plot_gradient_boosting_quantile.ipynb :alt: Launch JupyterLite :width: 150 px .. container:: sphx-glr-download sphx-glr-download-jupyter :download:`Download Jupyter notebook: plot_gradient_boosting_quantile.ipynb ` .. container:: sphx-glr-download sphx-glr-download-python :download:`Download Python source code: plot_gradient_boosting_quantile.py ` .. container:: sphx-glr-download sphx-glr-download-zip :download:`Download zipped: plot_gradient_boosting_quantile.zip ` .. include:: plot_gradient_boosting_quantile.recommendations .. only:: html .. rst-class:: sphx-glr-signature `Gallery generated by Sphinx-Gallery `_