sklearn.manifold.TSNE

class sklearn.manifold.TSNE(n_components=2, *, perplexity=30.0, early_exaggeration=12.0, learning_rate='auto', n_iter=1000, n_iter_without_progress=300, min_grad_norm=1e-07, metric='euclidean', metric_params=None, init='pca', verbose=0, random_state=None, method='barnes_hut', angle=0.5, n_jobs=None, square_distances='deprecated')[source]

T-distributed Stochastic Neighbor Embedding.

t-SNE [1] is a tool to visualize high-dimensional data. It converts similarities between data points to joint probabilities and tries to minimize the Kullback-Leibler divergence between the joint probabilities of the low-dimensional embedding and the high-dimensional data. t-SNE has a cost function that is not convex, i.e. with different initializations we can get different results.

It is highly recommended to use another dimensionality reduction method (e.g. PCA for dense data or TruncatedSVD for sparse data) to reduce the number of dimensions to a reasonable amount (e.g. 50) if the number of features is very high. This will suppress some noise and speed up the computation of pairwise distances between samples. For more tips see Laurens van der Maaten’s FAQ [2].

Read more in the User Guide.

Parameters:
n_componentsint, default=2

Dimension of the embedded space.

perplexityfloat, default=30.0

The perplexity is related to the number of nearest neighbors that is used in other manifold learning algorithms. Larger datasets usually require a larger perplexity. Consider selecting a value between 5 and 50. Different values can result in significantly different results. The perplexity must be less than the number of samples.

early_exaggerationfloat, default=12.0

Controls how tight natural clusters in the original space are in the embedded space and how much space will be between them. For larger values, the space between natural clusters will be larger in the embedded space. Again, the choice of this parameter is not very critical. If the cost function increases during initial optimization, the early exaggeration factor or the learning rate might be too high.

learning_ratefloat or “auto”, default=”auto”

The learning rate for t-SNE is usually in the range [10.0, 1000.0]. If the learning rate is too high, the data may look like a ‘ball’ with any point approximately equidistant from its nearest neighbours. If the learning rate is too low, most points may look compressed in a dense cloud with few outliers. If the cost function gets stuck in a bad local minimum increasing the learning rate may help. Note that many other t-SNE implementations (bhtsne, FIt-SNE, openTSNE, etc.) use a definition of learning_rate that is 4 times smaller than ours. So our learning_rate=200 corresponds to learning_rate=800 in those other implementations. The ‘auto’ option sets the learning_rate to max(N / early_exaggeration / 4, 50) where N is the sample size, following [4] and [5].

Changed in version 1.2: The default value changed to "auto".

n_iterint, default=1000

Maximum number of iterations for the optimization. Should be at least 250.

n_iter_without_progressint, default=300

Maximum number of iterations without progress before we abort the optimization, used after 250 initial iterations with early exaggeration. Note that progress is only checked every 50 iterations so this value is rounded to the next multiple of 50.

New in version 0.17: parameter n_iter_without_progress to control stopping criteria.

min_grad_normfloat, default=1e-7

If the gradient norm is below this threshold, the optimization will be stopped.

metricstr or callable, default=’euclidean’

The metric to use when calculating distance between instances in a feature array. If metric is a string, it must be one of the options allowed by scipy.spatial.distance.pdist for its metric parameter, or a metric listed in pairwise.PAIRWISE_DISTANCE_FUNCTIONS. If metric is “precomputed”, X is assumed to be a distance matrix. Alternatively, if metric is a callable function, it is called on each pair of instances (rows) and the resulting value recorded. The callable should take two arrays from X as input and return a value indicating the distance between them. The default is “euclidean” which is interpreted as squared euclidean distance.

metric_paramsdict, default=None

Additional keyword arguments for the metric function.

New in version 1.1.

init{“random”, “pca”} or ndarray of shape (n_samples, n_components), default=”pca”

Initialization of embedding. PCA initialization cannot be used with precomputed distances and is usually more globally stable than random initialization.

Changed in version 1.2: The default value changed to "pca".

verboseint, default=0

Verbosity level.

random_stateint, RandomState instance or None, default=None

Determines the random number generator. Pass an int for reproducible results across multiple function calls. Note that different initializations might result in different local minima of the cost function. See Glossary.

method{‘barnes_hut’, ‘exact’}, default=’barnes_hut’

By default the gradient calculation algorithm uses Barnes-Hut approximation running in O(NlogN) time. method=’exact’ will run on the slower, but exact, algorithm in O(N^2) time. The exact algorithm should be used when nearest-neighbor errors need to be better than 3%. However, the exact method cannot scale to millions of examples.

New in version 0.17: Approximate optimization method via the Barnes-Hut.

anglefloat, default=0.5

Only used if method=’barnes_hut’ This is the trade-off between speed and accuracy for Barnes-Hut T-SNE. ‘angle’ is the angular size (referred to as theta in [3]) of a distant node as measured from a point. If this size is below ‘angle’ then it is used as a summary node of all points contained within it. This method is not very sensitive to changes in this parameter in the range of 0.2 - 0.8. Angle less than 0.2 has quickly increasing computation time and angle greater 0.8 has quickly increasing error.

n_jobsint, default=None

The number of parallel jobs to run for neighbors search. This parameter has no impact when metric="precomputed" or (metric="euclidean" and method="exact"). None means 1 unless in a joblib.parallel_backend context. -1 means using all processors. See Glossary for more details.

New in version 0.22.

square_distancesTrue, default=’deprecated’

This parameter has no effect since distance values are always squared since 1.1.

Deprecated since version 1.1: square_distances has no effect from 1.1 and will be removed in 1.3.

Attributes:
embedding_array-like of shape (n_samples, n_components)

Stores the embedding vectors.

kl_divergence_float

Kullback-Leibler divergence after optimization.

n_features_in_int

Number of features seen during fit.

New in version 0.24.

feature_names_in_ndarray of shape (n_features_in_,)

Names of features seen during fit. Defined only when X has feature names that are all strings.

New in version 1.0.

learning_rate_float

Effective learning rate.

New in version 1.2.

n_iter_int

Number of iterations run.

See also

sklearn.decomposition.PCA

Principal component analysis that is a linear dimensionality reduction method.

sklearn.decomposition.KernelPCA

Non-linear dimensionality reduction using kernels and PCA.

MDS

Manifold learning using multidimensional scaling.

Isomap

Manifold learning based on Isometric Mapping.

LocallyLinearEmbedding

Manifold learning using Locally Linear Embedding.

SpectralEmbedding

Spectral embedding for non-linear dimensionality.

References

[1] van der Maaten, L.J.P.; Hinton, G.E. Visualizing High-Dimensional Data

Using t-SNE. Journal of Machine Learning Research 9:2579-2605, 2008.

[2] van der Maaten, L.J.P. t-Distributed Stochastic Neighbor Embedding

https://lvdmaaten.github.io/tsne/

[3] L.J.P. van der Maaten. Accelerating t-SNE using Tree-Based Algorithms.

Journal of Machine Learning Research 15(Oct):3221-3245, 2014. https://lvdmaaten.github.io/publications/papers/JMLR_2014.pdf

[4] Belkina, A. C., Ciccolella, C. O., Anno, R., Halpert, R., Spidlen, J.,

& Snyder-Cappione, J. E. (2019). Automated optimized parameters for T-distributed stochastic neighbor embedding improve visualization and analysis of large datasets. Nature Communications, 10(1), 1-12.

[5] Kobak, D., & Berens, P. (2019). The art of using t-SNE for single-cell

transcriptomics. Nature Communications, 10(1), 1-14.

Examples

>>> import numpy as np
>>> from sklearn.manifold import TSNE
>>> X = np.array([[0, 0, 0], [0, 1, 1], [1, 0, 1], [1, 1, 1]])
>>> X_embedded = TSNE(n_components=2, learning_rate='auto',
...                   init='random', perplexity=3).fit_transform(X)
>>> X_embedded.shape
(4, 2)

Methods

fit(X[, y])

Fit X into an embedded space.

fit_transform(X[, y])

Fit X into an embedded space and return that transformed output.

get_params([deep])

Get parameters for this estimator.

set_params(**params)

Set the parameters of this estimator.

fit(X, y=None)[source]

Fit X into an embedded space.

Parameters:
X{array-like, sparse matrix} of shape (n_samples, n_features) or (n_samples, n_samples)

If the metric is ‘precomputed’ X must be a square distance matrix. Otherwise it contains a sample per row. If the method is ‘exact’, X may be a sparse matrix of type ‘csr’, ‘csc’ or ‘coo’. If the method is ‘barnes_hut’ and the metric is ‘precomputed’, X may be a precomputed sparse graph.

yNone

Ignored.

Returns:
X_newarray of shape (n_samples, n_components)

Embedding of the training data in low-dimensional space.

fit_transform(X, y=None)[source]

Fit X into an embedded space and return that transformed output.

Parameters:
X{array-like, sparse matrix} of shape (n_samples, n_features) or (n_samples, n_samples)

If the metric is ‘precomputed’ X must be a square distance matrix. Otherwise it contains a sample per row. If the method is ‘exact’, X may be a sparse matrix of type ‘csr’, ‘csc’ or ‘coo’. If the method is ‘barnes_hut’ and the metric is ‘precomputed’, X may be a precomputed sparse graph.

yNone

Ignored.

Returns:
X_newndarray of shape (n_samples, n_components)

Embedding of the training data in low-dimensional space.

get_params(deep=True)[source]

Get parameters for this estimator.

Parameters:
deepbool, default=True

If True, will return the parameters for this estimator and contained subobjects that are estimators.

Returns:
paramsdict

Parameter names mapped to their values.

set_params(**params)[source]

Set the parameters of this estimator.

The method works on simple estimators as well as on nested objects (such as Pipeline). The latter have parameters of the form <component>__<parameter> so that it’s possible to update each component of a nested object.

Parameters:
**paramsdict

Estimator parameters.

Returns:
selfestimator instance

Estimator instance.

Examples using sklearn.manifold.TSNE

Comparison of Manifold Learning methods

Comparison of Manifold Learning methods

Comparison of Manifold Learning methods
Manifold Learning methods on a severed sphere

Manifold Learning methods on a severed sphere

Manifold Learning methods on a severed sphere
Manifold learning on handwritten digits: Locally Linear Embedding, Isomap...

Manifold learning on handwritten digits: Locally Linear Embedding, Isomap…

Manifold learning on handwritten digits: Locally Linear Embedding, Isomap...
Swiss Roll And Swiss-Hole Reduction

Swiss Roll And Swiss-Hole Reduction

Swiss Roll And Swiss-Hole Reduction
t-SNE: The effect of various perplexity values on the shape

t-SNE: The effect of various perplexity values on the shape

t-SNE: The effect of various perplexity values on the shape
Approximate nearest neighbors in TSNE

Approximate nearest neighbors in TSNE

Approximate nearest neighbors in TSNE